ROUND Pools Ambassador Spezifikationen

Stöbern Sie online oder laden Sie Spezifikationen nach Oberirdische Schwimmbäder ROUND Pools Ambassador herunter. ROUND Pools Ambassador Specifications Benutzerhandbuch

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 32
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 0
Part# 420870-15
SLIM STYLE
4 Foot Centers
OVAL POOL
ASSEMBLY
INSTRUCTIONS
GENERAL
Installation of this above ground pool is not extremely hard
or confusing, but it is a big job. The secret to installing a
pool so that it will give you years of pleasure is to take the
time to follow instructions and do things right the first time.
Your pool warranty is void if these instructions are not
followed 100%. Read all instructions including accessories
such as filters, pumps, skimmers, decks, etc. prior to
starting. Before you start, check to see that you have the
correct number of parts. Use your parts list which is broken
down by carton. The manufacturer reserves the right to
revise, change, or modify construction of its pools.
NOTE: If a power drill is used during installation,
it should be a variable speed drill used on low
setting. Torque should not exceed 39 inch pounds.
FAILURE TO COMPLY COULD RESULT IN SCREWS STRIPPING OUT.
DANGER
DO NOT DIVE OR JUMP
into your pool. Your pool is
approximately 4' deep.
It is not designed for diving or
jumping. If you dive or jump
into your pool you run the risk
of permanent injury or death.
Alert all visitors
and family of
this and point
out all warning
labels supplied.
ADULT SUPERVISION REQUIRED!
KEEP A CLEAR SPACE
OF AT LEAST 4 FEET
AROUND THE POOL
TO ELIMINATE
THE POSSIBILITY
OF CLIMBING
INTO THE POOL
313 REGINA AVENUE, RAHWAY, NEW JERSEY 07065-4891
Phone: (732) 574-1500 • Fax: (732) 574-1551 • www.swimnplay.com • E-mail: info@swimnplay.com
Seitenansicht 0
1 2 3 4 5 6 ... 31 32

Inhaltsverzeichnis

Seite 1 - OVAL POOL

Part# 420870-15SLIM STYLE 4 Foot Centers OVAL POOL ASSEMBLY INSTRUCTIONS GENERAL Installation of this above ground pool is not extremely hard

Seite 2

SIDE SUPPORT ASSEMBLING 3 Unpack and assemble the supports using the steps in the following pages. 4 6 10 3 1 11 5 1 - T-Plate 2 - Bo

Seite 3

PREPARE BUTTRESS TRENCHES 4 Use the chart on page 6 to find the correct distance from C to C Pool Pool Number of Trench

Seite 4

T-PLATES & VERTICAL PLATES ASSEMBLY 5 Start assembling the supports by placing two T-Plates inside the Bottom Support and insert and tighten the 3

Seite 5 - TO HELP OUT

CENTER SUPPORT POST ASSEMBLY 7 Center Support Post G FInsert the Support Post between the T-Plates and through the hole in the Vertical Plate (

Seite 6 - 7” XL POOLS

LEVEL SUPPORT ASSEMBLY 8 FILLING TRENCHES & BOTTOM SUPPORTS 9 Patio Block Trench Carpenter’s Level 2x4 Using a 2x4 and a level, as shown, make sur

Seite 7 - SUPREME POOLS

Dig a 1” deep straight line to insert the front lip of the Hold Down Plates. Assemble the Hold Down Plates on top of the Bottom Supports overlaying t

Seite 8 - PREPARING THE GROUND

BOTTOM RAIL AND STRAP LAYOUT 11 Follow the instructions below to properly layout the rail and strap assemblies.

Seite 9 - LEVELING THE GROUND

CLOSING THE WALL 13 Pool Wall 4 CLOSURE BARS 1/4"

Seite 10 - SIDE SUPPORT ASSEMBLING

3 LAYERS OF TAPE CLOTH TAPE OR DUCT TAPE VIEW FROM INSIDE OF POOL WALL SEAM SKIMMER INLET FITTING SKIMMER RETURN FITTING 3 LAYERS OF TAPE INSID

Seite 11 - PREPARE BUTTRESS TRENCHES

THRU-THE-WALL SKIMMER 17 IMPORTANT!! BEFORE CONTINUING WITH THIS STEP YOU MUST KNOW WHICH TYPE OF THROUGH THE WALL SKIMMER YOU WILL BE USING WI

Seite 13 - CENTER SUPPORT POST ASSEMBLY

Wall guard is optional. Tape wall guard (plastic sheeting) to pool wall 12" up from ground and smooth out on ground 12" from wall. This w

Seite 14 - AND HOLD DOWN PLATES

LINER INSTALLATION 19 LINER CAUTION YOUR POOL IS DESIGNED TO PROVIDE AN AMPLE SAFETY MARGIN WHEN IT STANDS ON LEVEL GROUND

Seite 15 - 1” Deep Trench

EZ HOOK LINER INSTALLATION ATTENTION: An 8 inch cove must be placed all around the inside of the pool 1. Clear all sticks a

Seite 16 - BOTTOM RAIL AND STRAP LAYOUT

1 VERTICALS 20 No. 12 x 1/2” Sheet Metal ScrewIf fencing or decking is to be installed, refer to the deck and fence instructions before installing th

Seite 17 - CLOSING THE WALL

PRE-ASSEMBLY OF TOP PLATES* 21 * NOTE: CAGE NUTS NOT NEEDED ON ALL POOLS - CHECK YOUR PACKING LIST Before the top plates are installed it is nec

Seite 18 - FILLING THE TRENCHES

Refer to the "Construction Close-ups" at the beginning of these Instructions as indicated below: SCREW HOLE LOCATION GUIDE 18x12 24x1

Seite 19 - THRU-THE-WALL SKIMMER

INSTALLING TOP COVERS 24 FOLLOW THE INSTRUCTIONS BELOW FOR THE COVERS FOR YOUR PARTICULAR POOL 4", 6" & 7" DELUXE TOP COVERS Thes

Seite 20 - EARTH MOUND

6" & 7" TWO-PIECE FULL CONTOURED COVER Slide inside cover (the cover which will be closest to the inside of the pool) into position

Seite 21 - LINER INSTALLATION

7" AND 9” TWO-PIECE WRAP AROUND COVER AND PEDESTAL Slide the inside cover (the cover which will be closest to the inside of the pool) into

Seite 22 - BEADED LINER INSTALLATION

7" XL TWO-PIECE WRAP AROUND COVER AND PEDESTAL 1 - Insert the logo into the cover. 2 - Slide the outside cover in

Seite 23 - VERTICALS

SAFETY TIPS - RULES AND REGULATIONS • Never permit the pool to be used unless at least one person other than the b

Seite 24 - TOP PLATES AND RAILS

WARNING Four (4) danger labels have been provided for your safety. Apply these labels to the pool where they a

Seite 25 - INSTALLING LEDGES

PREVENTATIVE MAINTENANCE TIPS • Use clear lacquer or clear nail polish to cover screw heads. • Use clear lacquer or

Seite 26 - INSTALLING TOP COVERS

HOW TO KEEP WATER CLEAR AND HEALTHFUL Your health, and maximum enjoyment is assured by keeping your pool water in sparkling clear a

Seite 27

CONTRACT INSTALLATIONS The manufacturer is in no way affiliated with any professional pool installer. Therefore the manufacturer

Seite 28 - PEDESTAL

• During night time pool use, artificial lighting shall be used to illuminate all safety signs, ladders, steps, deck surfaces an

Seite 29 - WRAP AROUND PEDESTAL

INSTALLATION • ASSEMBLY STEPS READ CAREFULLY BEFORE STARTING POOL ASSEMBLY CONSTRUCTION CLOSE-UPS Use the illustrations below as a guide for the as

Seite 30 - WARNING

INSTALLATION • ASSEMBLY STEPS READ CAREFULLY BEFORE STARTING POOL ASSEMBLY CONSTRUCTION CLOSE-UPS Use the illustrations below as a guide for the as

Seite 31 - CARE OF POOL WATER

PREPARING THE GROUND 1 Your pool must be installed on a solid level surface. After the pool location is selected drive the two end stakes "A&q

Seite 32

LEVELING THE GROUND 2 Using the “CLEARANCE SIZE” chart on page 6, determine the clearance size for your pool. With the use of the l

Kommentare zu diesen Handbüchern

Keine Kommentare